100 Watt Amplifier Circuit designed by using TDA7294 DMOS Audio Amplifier IC from st. For the loud and depth Audio output we go for higher watt output amplifier circuits. Following circuit will give you the best 100 watt result from 35V dual power supply. This 100 watt audio amplifier circuit is easy to design and has mute / stand by options. For 100 watts range amplifier circuit we need to put lot of power transistors and mosfets, here TDA7294V gives 100 watt audio output without any complex components.
The TDA7294 is a monolithic integrated circuit, comes in multiwatt 15 package. It is for use as audio class AB amplifier in Hi-Fi field applications. It has very high operating voltage range +/- 40V and high output power.
Pin Details of TDA7294
This IC TDA 7294 has muting / stand by functions, very low distortion, very low noise and short circuit protection and also thermal shutdown feature.
Components Required (BOM)
|+35V GND -35V DC Supply
Construction & Working
IC TDA7294 have Bipolar transconductance input stage, mos gain & level shifting stage, mos output stage and short circuit protection, external components are only for bias and filtering purpose.
This IC standby ON threshold voltage falls in 1.5V and stand by OFF threshold falls in 3.5V, by the way mute ON threshold voltage is 1.5V and mute OFF voltage is 3.5V, hence both pins are biased above 3.5V from +35V supply line. Use 8Ω / 100 watts speaker as load device to get expected output. Use all Resistors as 1 watt range and all capacitor as 60V range.
Interactive Board Viewer